Anti-static floor maintenance method
1, attaches great importance to the environment of use: laying anti-static floor room temperature should be controlled in 15-35 degrees, humidity control in the 45% 75% RH;
2, daily maintenance details:
(1) it is prohibited to use sharp instruments directly on the anti-static floor surface operation, prevent the damage on the surface of the antistatic performance and beautiful degree;
(2) prohibit personnel directly jump from a high place fell to the floor, when handling floor barbaric operation is forbidden, damage the floor;
(3) when the mobile device on the floor, the ban on direct drive device on the floor, to prevent scratch floor, the correct approach is to lift equipment for handling;
(4) may not be room in the heavy equipment in the anti-static floor directly, such easy to cause the floor deformation caused by the load for a long time, the right thing to do is to place heavy equipment on the ground base.
3, after just laying on the floor, often maintain indoor air circulation.
4, smooth overweight items should be put, furniture and weights are not hard line push-pull drag, so as not to scratch wear-resisting layer surface.
5, can't use sharp blow, floor surface.
And I never soaked in water for floor, use and if there is an accident, should be timely with dry dry mop mop the floor.
7, keep the floor dry clean, if there is dirt floor surface, usually with no dripping wet mop wipe dry.
Eight, to prevent the floor were cooking utensils into the deformation.
9, the door should be placed a doormat, reduce the abrasion of the floor by the sand.
10, with dedicated floor cleaner to remove spots and stains. Do not use any items damage performance is clean, such as metal tools, nylon friction pad and bleaching powder.
Above is the small make up to introduce anti-static floor maintenance method, a total of 10.The antistatic